Presets; Table 3-4 Pre-Programmed Presets - Honeywell ACUIX User Manual

High speed dome camera
Hide thumbs Also See for ACUIX:
Table of Contents

Advertisement

Operation and Programming with Honeywell Diamond Protocol

Presets

38
A Preset is a programmed scene (pan, tilt, zoom, focus, and iris setting) that can be recalled
by an operator, in response to an alarm, or set as the default function when the ACUIX is
idle for a specified time. There are 161 (0–160) Presets in each ACUIX dome. Presets 71–79
and 98–99 are pre-programmed for special functions and cannot be re-programmed.
Table 3-4
Pre-programmed Presets
Preset
Function
72
Recover encrypted PIN
75
Administrator Login screen
98
Camera reset
99
NightShot On/Off
Preset 99 is reserved for manually controlling the NightShot mode on cameras with IR block
filters. Preset 99 toggles between standard operation and the NightShot mode. The
NightShot mode must be manual for this Preset to function. The NightShot mode causes
the camera to pull the IR block filter and go to black and white to increase the sensitivity of
the video.
Program Preset
There are two methods for programming and saving Presets when using the
HEGS5000/HEGS5001 controller. The first method quickly saves the current camera scene
and assigns a predefined title. For example, Preset 1 is titled PS1, Preset 2 is titled PS2, and
so forth. The second method allows the user to program a 24-character title.
Note
The HEGS5000/5001 controller allows operators to program Presets 1–10. To
program Preset 0 and 9, you must log in as a Master user.
Program Preset Method 1 (PSn Title)
1.
Position the camera (pan, tilt) and the lens (zoom, focus, iris) to the desired scene.
Press Run Menu until Quick Prg Preset displays on the LCD screen and then
2.
press Enter.
3.
Using the numeric keys, enter the desired Preset number (refer to
reserved Presets) and press Enter. The current PTZ position and lens settings are
saved for the Preset number entered.
Example:
To save Preset 5 with the default title PS5.
1.
Position the camera and lens as desired.
Press Run Menu until Quick Prg Preset displays.
2.
3.
Press Enter.
Table 3-4
for

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Acuix hdcfp0000Acuix hdcgn0000Acuix hdcgp0000

Table of Contents