On-Screen Setup Menus
Introduction
Control/Video Requirements
Document 800-01023 Rev A
02/08
The ACUIX features on-screen menus for setting up the control features, camera, and
enabling and programming special features. The on-screen setup menus can be
accessed from a joystick controller and are displayed on the monitor where the ACUIX
video displays.
Special Presets are pre-programmed for accessing the on-screen setup menus when
using Honeywell VCL or 3rd party protocols.
1.
The ACUIX dome being set up must be selected as the control camera on the
controller.
2.
The video from the ACUIX dome must be displayed on a monitor.
3.
The controller must have manual control (pan and tilt) of the ACUIX dome.
ACUIX High Speed Dome User Manual
7
83