Cisco 3200 Use And Care Manual page 94

Chapter 7 Building the Second Row Table Assembly
Parts List
Figure 7-2 Four Molded foam bumpers and the four Table leg bases
1
3
37
Attach the first set of support brackets for the gutter and privacy panel to the table legs.
Step 3
Note the table layout. Each section is numbered as shown in Figure 7-3. Each cable gutter and privacy
Note
panel is different. The numbering for the cable gutters and privacy panels correspond to the numbering
for the table top.
When you attach the support brackets, it can be helpful to turn the table leg upside-down.
Tip
Cisco TelePresence System 3200
7-6
OL-14521-01