Replacing A First Row Table Top Section; Required Information, Tools, And Equipment - Cisco 3200 Use And Care Manual

Cisco systems telepresence system installation guide
Hide thumbs Also See for 3200:
Table of Contents

Advertisement

Replacing a First Row Table Top Section

Step 9
Slightly separate the shelf to be replaced from the other shelves.
Caution
Make sure that all remaining shelves stay on the display structure and do not fall between the structure
supports.
Slide the shelves to the left; there is space on the left that is created by the open table door.
Tip
Remove the splines from the slot at both edges of the shelf to be replaced.
Step 10
Place the new shelf on the display assembly.
Step 11
Place the splines in the slots at the edges of the new shelf.
Step 12
Press the shelves together.
Step 13
Attach the new shelf to its adjoining shelf or shelves using the splines.
Step 14
From the underside of the display structure, insert the draw bolts or cam locks and tighten them; then,
Step 15
attach the connecting plate between the new shelf and its adjoining shelf or shelves.
Attach the screws that connect the display shelves to the display assembly.
Step 16
Reattach the speaker boards and speaker cables. See
Step 17
Cisco TelePresence Elements"
Reattach the projector screen.
Step 18
The projector screen comes with printed instructions that should assist you with replacing it. If you
Tip
cannot find the instructions, reverse the order of removal to install it.
Power on the system by completing the steps in the
Step 19
Replacing a First Row Table Top Section
Complete these steps to replace a first row table top section.

Required Information, Tools, and Equipment

To remove and replace a first row table top section, you need the following tools:
A 10 mm open end ratcheting wrench is useful to loosen and tighten the draw bolts or cam locks.
Tip
Make sure to retain all screws, connectors, and other parts during the disassembly.
Note
Cisco TelePresence System 3200
12-30
Medium and large Phillips screwdriver
10 mm wrench
Chapter 8, "Assembling the Remaining
for detailed instructions.
"Powering On the System" section on page
Chapter 12
Field-Replaceable Unit Guide
OL-14521-01
12-4.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Telepresence 3200

Table of Contents