Cisco 3200 Use And Care Manual page 108

Parts List
•
Figure 7-18 Tabletop Section 3 (Section 6)
Step 19 Place table section 4 (section 3) on the table and join it to table section 2 (section 4) using either the
spline or biscuits, then use the draw bolts to join the sections.
Note If you are building a Reduced Configuration table (four tabletops instead of six), continue to
after completing this step.
Cisco TelePresence System 3200
7-20
Insert four wooden biscuits in the slot between the two table sections and join the sections together,
then insert and tighten the draw bolts evenly on each side until the tabletop sections are joined.
39
Chapter 7 Building the Second Row Table Assembly
16
3(6)
40
57
Step 22
OL-14521-01