Cisco 3200 Use And Care Manual page 71

Chapter 6 Building the First Row Table Assembly
Table elements are heavy, and metal edges can be very sharp. Protect your hands and eyes from injury
Caution
by wearing safety gloves and glasses.
In order to prevent scratching the Display shelves, you should avoid putting any tools on the shelf
Caution
surfaces.
The directions left and right refer to the assembly as you face it from the front.
Note
Table legs are unstable until they are fully attached to the tabletop. Do not use unattached table legs
Warning
as tabletop supports while you attach tabletop segments. They can fall and cause injury or damage.
Cisco suggests you use the accessory cabinets to support and stabilize the table segments as you
install them.
Remove the Metal packaging braces from the Molded foam bumpers.
Step 1
Figure 6-1
Step 2 Assemble the four Molded foam bumpers and the four Table leg bases.
OL-14521-01
Metal packaging braces and their Molded foam bumpers
3
2
Cisco TelePresence System 3200
Parts List
6-3