Mounting and Leveling the Plasma Displays
Revised: September 16, 2009, OL-14521-01
Parts List
Key Part Description
1
65-inch high-definition display
2
Black buffer strips
Display shelf section: left
Display shelf section: center
Display shelf section: right
M8 x 20 mm screws
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Some system components have metal and plastic edges with hard angles. These edges are exposed until
Caution
you complete system assembly. Use caution when you move around the system during assembly to avoid
contact with any exposed system edges.
The directions left and right refer to the assembly as you face the Plasma displays.
Note
OL-14521-01
Part Number
Qty
Ctn
CTS-DISP-65-
3
23,
GEN2
24,
74-4881-xx
25
700-23981-xx
2
1
95-9692-xx
1
58
Kit #
74-5304-xx
95-9694-xx
1
58
Kit #
74-5306-xx
95-9693-xx
1
58
Kit #
74-5305-xx
48-2273-01
1
C H A P T E R
Notes
The Display shelves are used in this chapter for
leveling purposes only. The Display shelves and the
attaching bracketing hardware are described in
Chapter 4, "Building the Display Shelf Assembly."
Cisco TelePresence System 3200
3
3-1