Chapter 12
Field-Replaceable Unit Guide
Figure 12-4
Power and Signal Connections for Displays with DVI Connectors
Hang the replacement Plasma display.
Step 12
Plug in the signal cable to the correct codec.
Step 13
SeeChapter 9, "Routing Power and Signal Cables."
Plug in the power cable to the correct PDU.
Step 14
See
Step 15
Align and level the display and add the black seam tape.
See
Step 16
If required, attach the camera cluster.
See
Power and Signal Cables."
Step 17
Reassemble the display shelf sections.
See
OL-14521-01
AC inlet
Chapter 9, "Routing Power and Signal Cables."
Chapter 3, "Mounting and Leveling the Plasma Displays."
Chapter 8, "Assembling the Remaining Cisco TelePresence Elements"
Chapter 4, "Building the Display Shelf Assembly."
Replacing a Plasma Display—Part Number CTS-DISP-65-GEN4=
On/Off Switch
Codec DMP
and
Chapter 9, "Routing
Cisco TelePresence System 3200
12-13