Appendix A: Parts List Sorted By Carton; Overview - Cisco 3200 Use And Care Manual

Chapter Organization
Chapter 7, "Building the Second Row Table Assembly"
•
Chapter 8, "Assembling the Remaining Cisco TelePresence Elements"
•
•
Chapter 9, "Routing Power and Signal Cables"
•
•
•
Chapter 10, "First-Time Setup"
•
Chapter 11, "Use & Care Guide"
•
Chapter 12, "Field-Replaceable Unit Guide"
•

Appendix A: Parts List Sorted by Carton

•
Appendix B: Region- and Country-Specific Equipment
•
Figure 1-1 View of an Assembled Cisco TelePresence System 3200, Standard Configuration
Step 1 Install and connect the camera assembly. See
Remaining Cisco TelePresence Elements"
"Routing Power and Signal Cables"
Cisco TelePresence System 3200
1-2
This chapter describes how to build the second row table and is organized the same as Chapter 2.
This chapter is organized the same as Chapter 2.
Each element is described using one or more illustrations. The elements are:
Camera assembly—attaches to the center Display structure
–
Front row table leg wiring assembly—wired for power and network connectivity
–
Projector assembly—attaches to the underside of the center table segment
–
Codec and Audio/Video Extension Unit assembly—attach the codecs to each Display
–
structure and attach the extension unit to the center display structure
Speaker assembly—attach to the underside of the Display shelf
–
Projector Screen assembly—attaches to the underside of the Display shelf
–
Cisco Unified IP Phone 7975—used for initial configuration of the Cisco TelePresence system
–
and to join meetings
Camera Target assembly—used for camera focus and alignment
–
A series of illustrations are used to describe the routing and connection of power and signal cables
for the front row and the display assembly area.
Illustrations show you the routing path to take for all cables.
Illustrations showing cables terminating in a Codec include a close-up of the Codec.
This chapter describes the configuration you perform to set up your Cisco TelePresence System
3200 for the first time.
This chapter provides information on maintaining several elements of the
Cisco TelePresence System 3200, including the tabletop and plasma displays.
This chapter describes removal and replacement processes for various elements of the
Cisco TelePresence System 3200.
This appendix lists all parts included in the individual chapter parts lists, and sorts the list by carton.
This appendix lists the part numbers for all region- and country-specific equipment, including table
leg wiring and power cords.
Step 1 and Step 2
to install the camera assembly and
to connect the camera cables.
Chapter 1
in Chapter 8, "Assembling the
Step 13 in Chapter 9,

Overview

OL-14521-01