Replacing a Speaker—Part Number CTS-LDSPKR=
Step 18
Hang the speaker boards.
See
Power on the system by completing the steps in the
Step 19
Reattach the projector screen.
Step 20
The projector screen comes with printed instructions that should assist you with replacing it. If you
Tip
cannot find the instructions, reverse the order of removal to install it.
Step 21
Reassemble the left door tabletop section.
See
Perform the display adjustment procedure.
Step 22
See the
If you moved the camera, complete the following steps:
Step 23
a.
b.
Repackage the old display using the new display box and packing materials.
Step 24
Replacing a Speaker—Part Number CTS-LDSPKR=
Required Information, Tools, and Equipment
To remove and replace a speaker for the Cisco TelePresence 3200, you need the following information,
tools, and equipment:
•
•
Tip
•
•
•
•
Cisco TelePresence System 3200
12-14
Chapter 8, "Assembling the Remaining Cisco TelePresence Elements."
Chapter 6, "Building the First Row Table Assembly."
"Setting Up the Displays" section on page 10-5
Perform the camera adjustment procedure and, if required, refocus and realign the camera.
See the
"Setting Up the Cameras" section on page 10-6
Attach the camera hood and lens hood.
See
Chapter 8, "Assembling the Remaining Cisco TelePresence Elements."
Cisco TelePresence System Release 1.4 Administrator's Guide, OL-13676-03
Power screwdriver with 2.5, 3, and 6 mm (standard or round) Allen bits, or standard 2.5, 3, and 6 mm
Allen wrenches
A round-head Allen bit allows the bit to work at an angle instead of only straight out, which is
helpful in tight spots.
Manual screwdrivers, Phillips and flat head types
Metric wrenches, 10 to 15 mm
9/64-inch Allen wrench (supplied with speakers)
Laptop computer attached to network (for troubleshooting or reference)
Chapter 12
"Powering On the System" section on page
for more information.
for more information.
Field-Replaceable Unit Guide
12-4.
OL-14521-01