Chapter 9
Routing Power and Signal Cables
Step 12
Attach and route the power and signal cables for the plasma displays.
Connect the center plasma display to "UNSWITCHED" outlet of the the auxiliary control unit.
Note
Figure 9-12
Cabling the Plasma Display
Signal
Power
Note
Figure 9-12
Before you plug cables into a Codec or PDU, label each cable.
Tip
OL-14521-01
displays the rear view of the Cisco TelePresence System 3200. Left and right are reversed.
Power Requirements for the Cisco TelePresence 3200
Cisco TelePresence System 3200
9-15