Removing And Replacing A Second Row Table Top Section - Cisco 3200 Use And Care Manual

Chapter 12 Field-Replaceable Unit Guide

Removing and Replacing a Second Row Table Top Section

Remove the privacy panel from the following table top sections:
Step 1
•
•
Note
Remove the microphone from the table top section to be replaced. See
Step 2
of the microphone and its attachment hardware.
Disconnect the microphone from the audio/video extension unit, route the cable through the table top
Step 3
section, and remove the microphone.
The microphone cable routes from the audio/video extension unit to the table top section by way of the
cable gutters on the second row table. The gutters are behind the privacy panels that you removed in
Step
Step 4 If required, remove the cable cover for the right end privacy panel as shown in
cable ties that bundle the microphone cable with other cables.
Remove the privacy panel alignment bracket.
Step 5
See
alignment brackets.
If you are replacing the left or right tabletop end, remove the privacy panel end piece and panel end
Step 6
brace. See
locations.
Remove the privacy panel hangers from the table legs that support the table top section to be replaced.
Step 7
See
points and screw locations.
Remove the floating bracket on each side of the table top section to be replaced.
Step 8
See
and screw locations.
Remove the gutter panel for the table top section to be replaced.
Step 9
See
screw locations.
Remove the gutter and privacy panel support brackets from the table legs that support the table top
Step 10
section to be replaced.
See
privacy panel support brackets.
Remove the screws from the table legs that support the table top section.
Step 11
OL-14521-01
The table top section to be replaced
All table sections to the right of the table top section to be replaced
See Chapter 7, "Building the Second Row Table Assembly"
panels.
1.
Chapter 7, "Building the Second Row Table Assembly"
Figure 7-47 for the privacy panel end piece locations and
Chapter 7, "Building the Second Row Table Assembly"
Chapter 7, "Building the Second Row Table Assembly"
Chapter 7, "Building the Second Row Table Assembly"
Chapter 7, "Building the Second Row Table Assembly"
Replacing a Second Row Table Top Section
for expanded views of the privacy
Figure 7-38 for an expanded view
Figure 7-46
for the location of the privacy panel
Figure 7-30 for the panel end brace
for the privacy panel hanger attachment
for the floating bracket attachment points
for the gutter panel attachment points and
for the screw locations for the gutter and
Cisco TelePresence System 3200
and remove
12-33