Configuring The Profile - Honeywell Marathon User Manual

Configuring the Profile

Use the instructions in this section to complete the entries on the Profile tab according to the type of wireless security used
by your network. The instructions that follow are the minimum required to successfully connect to a network. Your system
may require more parameters than are listed in these instructions. Please see your system administrator for complete infor-
mation about your network and its wireless security requirements.
To begin the configuration process:
• From the Configuration tap Manage Profiles > Admin Login. Enter the password and tap Login.
• If using a single profile, edit the default profile with the parameters for your network. Select the Default profile from the
pull-down menu.
• Make any desired parameter changes as described in the applicable following section determined by network security
type and click the Commit button to save the changes.
IMPORTANT – Remember to click the Commit button after making changes to ensure the changes are saved. The LCM
may display a reminder if the Commit button is not clicked before an attempt is made to close or browse away from the tab
in focus if there are unsaved changes.
If changes are made to the stored credentials, click Commit to save those changes first before making any additional
changes.
6 - 17