Honeywell Marathon User Manual page 143

Network Tab
The appearance of the network tab depends on the type of firmware selected.
Network with SIM Card
Select Connection
Select connection and tap Apply. A "Network changed successfully" message is displayed.
Setting
Select automatically
Use GPRS/EDGE only
Use UMTS/HSPA only
Close the tab and view the signal strength icon in the main window. Once the signal strength is displayed, you can
establish a connection.
Select Network From Available Networks
Select the network and tap on the register button. If the change is successful you will see the message "Network
changed successfully".
Note: When you are registered to a CDMA network, you cannot select the network. "All CDMA network" is shown
instead.
Note: The network list only appears if the connection setting is Only use GPRS or Only use UMTS/HSPA.
Function
Selects the best suited network automatically
Use only GPRS/EDGE for a connection
Use only UMTS/HSPA for a connection.
8 - 9