Boot Up Event; Parameter Event - Honeywell Marathon User Manual

Boot Up Event

When enabled, the decoder generates a message to the host whenever power is applied. When disabled, no notification is
sent.
Enable Boot Up Event
* Disable Boot Up Event

Parameter Event

When enabled, the decoder generates a message to the host when one of the events specified below occurs. When dis-
abled, no notification is sent.
Enable Parameter Event
* Disable Parameter Event
Event Class
Decode Event
Boot Up Event
Parameter Event
13 - 20
Event
Non parameter decode
System power-up
Parameter entry error
Parameter stored
Defaults set (and parameter event is enabled by default)
Number expected
Code Reported
0x01
0x03
0x07
0x08
0x0A
0x0F