Honeywell Marathon User Manual page 111

PEAP/GTC
To use PEAP/GTC, make sure the following profile options are used.
1. Enter the SSID of the Access Point assigned to this profile.
2. Set EAP Type to PEAP-GTC.
3. Set Encryption to WPA TKIP.
4. Set Auth Type to Open.
5. To use another encryption type, select WPA CCKM, WPA2 AES or WPA2 CCKM for encryption and complete
other entries as detailed in this section.
6. See Sign-On vs. Stored Credentials
7. Click the Credentials button.
8. No entries except the CA Certificate Filename are necessary for Sign-On Credentials as the user will be prompted
for the User Name and Password when connecting to the network. Enter these items as directed below.
(page 6-52) for information on entering credentials.
6 - 61