Attaching The Shoulder Strap - Honeywell Marathon User Manual

Check the closed loop fastener and hand strap base connection frequently. If loose, they must be tightened or replaced before
the Marathon is placed into service again.

Attaching the Shoulder Strap

The shoulder strap is designed to be used with the Marathon with or without an extended battery attached. The shoulder strap
is designed so the Marathon can be mounted in the desktop dock or the vehicle dock without removing the shoulder strap.
1. Place the Marathon with the screen facing down, on a flat stable surface.
2. Remove the upper two of these plugs by unscrewing them in a counter-clockwise direction. Remove only the plugs
necessary to mount the strap.
3. Insert the Strap Attaching Screws into the upper two holes. These screws have an eye to attach the strap.
4. Thread the longer nylon loop of one of the Shoulder Strap Adapters through one of the Strap Attaching Screws. Then thread
the other end of the Shoulder Strap Adapter through the longer loop and pull tight. Repeat for the other Shoulder Strap
Adapter using the other Strap Attaching Screw.
5. Hook the swivel hooks on each end of the Shoulder Strap to the short loops on the adapters.
6. Adjust the shoulder strap length as desired. Adjust the pad on the shoulder strap so it rests comfortably on the shoulder.
2 - 10