Honeywell Marathon User Manual page 114

EAP-FAST
To use EAP-FAST, make sure the following profile options are used.
1. Enter the SSID of the Access Point assigned to this profile.
2. Set EAP Type to EAP-FAST.
3. Set Encryption to WPA TKIP.
4. Set Auth Type to Open.
5. To use another encryption type, select WPA CCKM, WPA2 AES or WPA2 CCKM for encryption and complete
other entries as detailed in this section.
The SCU supports EAP-FAST with automatic or manual PAC provisioning. With automatic PAC provisioning, the user
credentials, whether entered on the saved credentials screen or the sign on screen, are sent to the RADIUS server.
The RADIUS server must have auto provisioning enabled to send the PAC provisioning credentials to the Marathon.
For Automatic PAC provisioning, once a username/password is authenticated, the PAC information is stored on the
Marathon. The same username/password must be used to authenticate each time.
Note: When using Automatic PAC Provisioning, once authenticated, there is a file stored in the \Program
Files\Summit\certs folder with the PAC credentials. If the username is changed, that file must be deleted. The
filename is autoP.00.pac.
For manual PAC provisioning, the PAC filename and Password must be entered.
See Sign-On vs. Stored Credentials
The entries on the Credentials screen are determined by the type of credentials (stored or sign on) and the type of PAC
provisioning (automatic or manual).
6 - 64
(page 6-52) for information on entering credentials.