Honeywell Marathon User Manual page 220

Code Option
Type Value
1
3
GS1 DataBar Family
EAN/UCC Composites (GS1 DataBar, UCC/EAN-128, 2D portion of UPC composite)
0
1
2
3
-
1
PDF417, Micro PDF417
0
1
2
3
4
5
Data Matrix
0
1
2
3
4
5
6
13 - 28
Option
Two check digits.
Check characters validated but not transmitted.
No option specified at this time. Always transmit 0. GS1 DataBar-14 and GS1 DataBar-
Limited transmit with an Application Identifier "01".
Note: In UCC/EAN-128 emulation mode, GS1 DataBar is transmitted using Code 128 rules
(i.e., ]C1).
Example: An GS1 DataBar-14 bar code 100123456788902 is transmitted as
]e001100123456788902.
Native mode transmission. Note: UPC portion of composite is transmitted using UPC rules.
Standard data packet.
Data packet containing the data following an encoded symbol separator character.
Data packet containing the data following an escape mechanism character. The data packet
does not support the ECI protocol.
Data packet containing the data following an escape mechanism character. The data packet
supports the ECI protocol.
UCC/EAN-128 emulation
Note: UPC portion of composite is transmitted using UPC rules.
Data packet is a UCC/EAN-128 symbol (i.e., data is preceded with ]JC1).
Reader set to conform to protocol defined in 1994 PDF417 symbology specifications. Note:
When this option is transmitted, the receiver cannot reliably determine whether ECIs have
been invoked or whether data byte 92DEC has been doubled in transmission.
Reader set to follow the ECI protocol (Extended Channel Interpretation). All data characters
92DEC are doubled.
Reader set for Basic Channel operation (no escape character transmission protocol). Data
characters 92DEC are not doubled. Note: When decoders are set to this mode, unbuffered
Macro symbols and symbols requiring the decoder to convey ECI escape sequences cannot
be transmitted.
The bar code contains a UCC/EAN-128 symbol, and the first codeword is 903-907, 912,
914, 915.
The bar code contains a UCC/EAN-128 symbol, and the first codeword is in the range 908-
909.
The bar code contains a UCC/EAN-128 symbol, and the first codeword is in the range 910-
911.
Example: A PDF417 bar code ABCD, with no transmission protocol enabled, is transmitted
as ]L2ABCD.
ECC 000-140, not supported.
ECC 200.
ECC 200, FNC1 in first or fifth position.
ECC 200, FNC1 in second or sixth position.
ECC 200, ECI protocol implemented.
ECC 200, FNC1 in first or fifth position, ECI protocol implemented.
ECC 200, FNC1 in second or sixth position, ECI protocol implemented.