Chapter 5 - Using Peripherals / Accessories; Attaching An Extended Battery - Honeywell Marathon User Manual

5
Using Peripherals / Accessories

Attaching an Extended Battery

Note: Installing or removing accessories should be performed on a clean, well-lit surface. Protect the work surface, the
Marathon, and components from electrostatic discharge. Contact
or removing an extended battery.
1. Turn the Marathon Off. Remove any cables, straps or accessories attached to the Marathon.
2. Place the Marathon face down on a stable surface.
3. Remove the 2 mounting screws securing the extended battery connector cover to the Marathon and remove the cover. Put
the screws and cover aside in a safe place.
4. Line up the charging pins on the extended battery with the charging pins in the Marathon extended battery connector bay.
5. Connect the extended battery to the Marathon using the captive screws in the extended battery.
Customer Support (page 14-1) for help when attaching
5 - 1