Configuring The Profile - Honeywell Marathon User Manual

6. Uncheck the Use full trusted store checkbox.
7. Select the desired certificate and click the Select button to return the selected certificate to the CA Cert text-
box.
8. Click OK to exit the Credentials screen and then Commit to save the profile changes.

Configuring the Profile

Use the instructions in this section to complete the entries on the Profile tab according to the type of wireless security used
by your network. The instructions that follow are the minimum required to successfully connect to a network. Your system
may require more settings than are listed in these instructions. Contact your system administrator for complete information
about your network and its wireless security requirements.
To begin the configuration process:
• On the Main Tab, click the Admin Logon button and enter the password.
• Edit the default profile with the settings for your network. Select the Default profile from the pull down menu.
• Make any desired changes as described in the applicable following section determined by network security type and click
the Commit button to save the changes.
IMPORTANT – Remember to click the Commit button after making changes to ensure the changes are saved. Many ver-
sions of the SCU (Summit Client Utility) display a reminder if the Commit button is not clicked before an attempt is made to
close or browse away from the tab in focus if there are unsaved changes.
If changes are made to the stored credentials, click Commit to save those changes first before making any additional
changes.
6 - 55