Vehicle Dock Technical Specifications; Battery Charger Technical Specifications; Electrical; Temperature - Honeywell Marathon User Manual

Vehicle Dock Technical Specifications

Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Vibration
Shock
IP Rating
Weight

Dimensions

Ports

Battery Charger Technical Specifications

Electrical

Note: Battery packs may leak up to 1mA current through the battery contacts when left in an unpowered battery charger
charging pocket.
Parameter
Power Supply Input Voltage (V AC-IN)
Power Supply Input Frequency (freq)
Power Supply Output Voltage

Temperature

Function Minimum
Operating 0°C (32°F)
Battery Pack 10°C (50°F)
Charging
Storage -20°C (-4°F)
Dimensions
Weight Battery Charger: < 3.5 lbs (1.6 kg) (no batteries, no power connection)
Power Supply: < 1.875 lbs (.85 kg) with cables attached
Length 36 cm (14.2 in)
Width 21.2 cm (8.35 in)
Height 6.55 cm (2.58 in)
Plug Type IEC320/C14
-20°C - 50°C (with Marathon in dock)
5 to 95% non-condensing
-30°C- 60°C degree
5 to 95% non-condensing
5G (w/ SSD)
30G (w/ SSD)
IP55 design
4 lb 4.7 oz / 1.95 kg
Width 9" / Length 6" / Height 7.5"
Width 22.8 cm / Length 15.2 cm / 18.8 cm
Power, 9 pin serial, 15-pin serial, Ethernet/USB, GPS antenna, Mobile Net antenna
Maximum
+50°C (120°F)
+45°C (113°F)
+70°C (160°F)
Minimum Maximum
100 VAC 240VAC
50Hz 60Hz
19VDC
Note
Battery packs will not begin charging when their internal
temperature is outside this range.
Unit is off.
Note
Auto-switching
6.32A
12 - 5