Honeywell Marathon User Manual page 53

Status
Start > All Programs > Laird > Laird Connection Manager > Status tab
This screen provides information on the radio:
• The status of the radio card:
○ Down - The radio is not recognized by the LCM.
○ Disabled - The radio is disabled.
○ Not Associated: The radio has not established a connection with an access point.
○ Associated: The radio has made a connection to an access point but has not EAP authenticated. If the
encryption type is set to WEP or None, the radio can communicate in the associated state. Otherwise the radio
cannot communicate unless it is associated and EAP authenticated.
○ Connected to (SSID): The radio is connected to the specified SSID.
• IP address.
• Signal strength (RSSI) displayed in dBm and graphically.
There are no user entries on this screen.
Note: After completing radio configuration, it is a good idea to review this screen to verify the radio has connected.
6 - 3