Configuring The Scan Demo Application - Honeywell Dolphin 75e User Manual

Preliminary Draft, Not for Release - Please Review 2-3-2015

Configuring the Scan Demo Application

1. Open the Scan Demo application, and then press the Menu button
2. Touch Setting
Touch Symbology Setting to access
the Symbologies Settings screen.
3. Modify the settings to meet your application needs, and then press the Back button
screen.
Settings
Symbology
Settings
4 - 4
or Symbology Setting
Touch the checkbox to enable or disable a feature.
• Vibrate - When checked, the terminal vibrates to indicate a successful bar code scan and
decode.
• View Statistics - When checked, scan results displayed include the length of bar code, the
number of scans completed, the number of milliseconds (ms) to decode the bar code, the
average decode time of all the bar codes decoded, the shortest decode time of all bar codes
decoded, and the longest decode time of all bar codes decoded.
• Sound - When checked, the terminal emits sound to indicate a successful or failed scan
attempt.
• Auto Scan Delay - Program the number of seconds between scan attempts by tapping the
menu arrow, and then entering the delay interval in second. The value should be greater
than 0 and less than 100000. Touch OK to save.
• Auto Send - When checked, decoded data is sent to a designated server.
• RF Configuration - Touch to view and/or edit the Server IP address and the Port used for
RF communication. When the Back button is pressed, the terminal attempts to establish
communication.
Touch the box next to the symbology name to toggle the symbology on (enabled) or off
(disabled). A green check mark indicates the symbology is enabled.
Note: Swipe up or down with your finger or stylus on the screen to scroll up or down the list
of available symbologies.
.
.
Touch Setting to access the Scan
Demo settings screen.
to return to the Scan Demo