Replacing The Main Battery - Honeywell Marathon User Manual

Replacing the Main Battery

Note: Installing or removing accessories should be performed on a clean, well-lit surface. Protect the work surface, the
Marathon, and components from electrostatic discharge. Contact
or removing a main battery.
1. Turn the Marathon Off. Remove any cables or accessories attached to the Marathon.
2. Place the Marathon face down on a stable surface.
3. Remove the 4 mounting screws securing the battery cover to the Marathon and remove the battery cover. Put the screws
aside in a safe place, i.e., where they can't get knocked off the table and onto the carpet and lost forever in the grey and
black pattern.
4. Lift the battery using the pull strap.
5. Hold the battery out of the way and carefully separate the Marathon plug (on the right) from the plug cabled to the main
battery. Do not bend the pins.
6. Connect the new battery cabled plug to the plug on the Marathon.
7. Lower the connected battery into the battery well using the pull strap.
8. Replace the battery cover, securing it with the original 4 screws.
9. Connect the Marathon to an external power source. The main battery will be fully charged in 2 hours.
5 - 4
Customer Support (page 14-1) for help when installing