Honeywell Marathon User Manual page 63

To Use Stored Credentials
1. After completing the other entries in the profile, scroll down for the credentials entry.
2. Enter the Username and Password.
3. Click the Commit button.
4. For LEAP and WPA/LEAP, configuration is complete.
5. Importing the CA certificate into the Windows certificate store is optional.
6. For EAP-TLS, import the User Certificate into the Windows certificate store.
7. Return to the Profile tab.
8. Select the CA certificate. The certificate can be specified by file name (from the Certs path), a certificate selected
from the Windows certificate store or the full certificate store.
9. For EAP-TLS, select the User Cert (User Certificate filename).
10. If using EAP FAST and manual PAC provisioning, input the PAC filename and password.
11. Click the Commit button.
12. If changes are made to the stored credentials, click Commit to save those changes before making any additional
changes to the profile or global parameters.
13. Verify the device is authenticated by reviewing the Status tab. When the device is property configured, the Status
tab indicates the device is Authenticated and the method used.
Note: See Configuring the Profile
Note: If invalid credentials are entered into the stored credentials, the authentication will fail. No error message is
displayed. The user may or may not be prompted to enter valid credentials.
(page 6-17) for more details.
6 - 13