Honeywell Marathon User Manual page 100

Logon Options
There are two options available, a single signon which uses the Windows username and password as the credentials
for 802.1x authentication and pre-logon which uses saved credentials for 802.1x authentication before Windows logon.
If either option is enabled, the credentials entered here take precedence over any credentials entered on the Profile
tab.
To use either option, select Logon Options from the Property list which activates the Logon Options button.
Click the Logon Options button.
Single Signon
To use the Single Singon option, select the checkbox for Use the Windows username and password when avail-
able. When the active profile is using LEAP, PEAP-MSCHAP, PEAP-GTC or EAP-FAST, the Summit Client Utililty
ignores the username and password, if any, saved in the profile. Instead, the username and password used for
Windows logon is used. Any certificates needed for authentication must still be specified in the profile.
Click OK then click Commit..
Pre-Logon Connection
To use the Pre-logon connection, select the checkbox for Enable pre-logon connection. This option is designed to
be used when:
• EAP authentication is required for a WLAN connection.
• Single Signon is configured, so the Windows username and password are used as credentials for
EAP authentication.
• The WLAN connection needs to be established before the Windows logon.
6 - 50