Connecting A Cigarette Lighter Power Adapter; Connecting Cables To The Vehicle-Mounted Dock - Honeywell Marathon User Manual

Connecting a Cigarette Lighter Power Adapter

Note: The Honeywell-approved Cigarette Lighter cable is intended for use in 12V DC negative ground systems only
Connect to Vehicle Mounted Dock
Honeywell Product ID: FX1312PWRSPLY, Power Supply, 12V -12V Vehicle Adapter
1. Plug the lighter end of the cordset into an appropriate automotive cigarette lighter receptacle. The LED on the ciga-
rette lighter power adapter illuminates to indicate it is drawing power from the vehicle.
2. Connect the dock end of the power cable to the vehicle dock Power port.
3. The Power LED on the front of the vehicle dock illuminates when it is receiving power from the vehicle battery.
4. When the Marathon is in the powered vehicle mounted dock, the Marathon Battery Status LED at the upper left,
next to the display, illuminates orange to indicate the Marathon battery is recharging by drawing vehicle power
through the vehicle mounted dock.
Connect to Marathon
This vehicle adapter is designed for situations when a vehicle mount dock is not used and the Marathon requires vehi-
cle power.
Honeywell Product ID: FX1311PWRSPLY, Power Supply, 12V -19V Vehicle Adapter
1. Plug the lighter end of the cordset into an appropriate automotive cigarette lighter receptacle. The LED on the
power supply illuminates to indicate it is connected to vehicle power.
2. Plug the barrel connector end of the cordset into the Marathon Power port.
3. When the Marathon is receiving power from the vehicle, the Battery Status LED at the upper left, next to the Mara-
thon display, illuminates orange to indicate the Marathon battery is recharging.

Connecting Cables to the Vehicle-Mounted Dock

Note: Route all cables to ensure they are protected from jostling, tugging or being disconnected by passing objects.
Power Port
Insert the dock end of the vehicle mount dock power cable assembly in this port. The Power port also accepts the dock
end of the cigarette lighter power adapter. The Power LED on the front of the dock illuminates when the vehicle dock is
receiving vehicle power.
Serial Port
A serial 9-pin accessory cable can be connected to this port.
Serial Monitor Port
A serial monitor 15-pin cable can be connected to this port.
11 - 16