Set All Defaults / Cancel Bar Codes - Honeywell Marathon User Manual

Parameter
MicroQR
QR Inverse
Aztec
Aztec Inverse
Event Reporting
Decode Event
Boot Up Event
Parameter Event
Symbology-Specific Security Levels
Redundancy Level
Security Level
Intercharacter Gap Size
Macro PDF

Set All Defaults / Cancel Bar Codes

Use the Set All Defaults bar code to return all parameters to their default values. Scanning this bar code does not affect the
Marathon operating system, wireless client or installed software settings.
Note: When the Enable / Disable Parameter Scanning
Set All Defaults bar code. Default value of Parameter Scanning is Enable.
When parameters are changed, the new value replaces the standard default value in memory.
Set All Defaults
Cancel
Default Value
Enable
Not Supported
Enable
Not Supported
Disable
Disable
Disable
Not Supported
Not Supported
Not Supported
Not Supported
(page 13-10) parameter is disabled, the scan engine can still scan the
13 - 9