Honeywell Marathon User Manual page 247

Next, scan four numeric bar codes that correspond to the desired value. Single digit numbers must have a leading
zero. To correct an error or to change a selection, scan Cancel on Imager Keypad Number Symbols (page 13-84).
Length Within Range
This option decodes a code type within a specified minimum and maximum range. For example, when you want to
scan only Code 11 symbols containing between 4 and 12 characters, scan the "Code 11 Length Within Range" bar
code and then "0", "4", "1" and "2" bar codes.
To begin setting lengths within a range, scan this Code 11 Length Within Range bar code:
Next, scan numeric bar codes that correspond to the desired value using Imager Keypad Number Symbols (page 13-
84). Single digit numbers must have a leading zero. To correct an error or to change a selection, scan Cancel on the
Imager Keypad Number Symbols page.
Any Length
This option decodes Code 11 bar codes containing any number of characters.
To set any length, scan this Code 11 Any Length bar code:
13 - 55