Battery Charger Top View
Mounting holes for table mounting are located in the bottom of the first and the fourth charging pocket.
The mounting holes require #10 / 4mm screws/washers or bolts/nuts (not supplied by Honeywell).
Extended Battery Back View
The Marathon 42Whr Extended or 62Whr Extended batteries are physically identical except the 62Whr battery is thicker than
the 42Whr battery.
1. Charging Bay LED
2. Power Connector (Back of Charger)
3. LED Legend
4. Power Indicator
1. Captive Screw
2. Rubber Foot
3. Battery Charging Terminals
10 - 3