Section 5 - User Codes; Introduction To User Code Setup; Authority Levels - Honeywell ADEMCO 6271 Series Installation And Setup Manual

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
In This Section
o
Introduction to User Code
Setup
o

Authority Levels

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Introduction to User Code Setup

Each user must be assigned a name with a corresponding 4-digit user
code in order to gain access to various features and functions. The
TouchCenter can hold the identity for 10 Users in its memory. If
additional Users are needed, define the additional Users using the
Console Emulation Mode.
Users for the system are programmed in a central user setup location
that provides the specific questions for authorization levels assigned
to different users. You may want these users to be the same, but
there are situations in which you may want a user to have limited
capabilities. These capabilities are defined by the Authority Level
assigned to each user.
Authority Levels
Authority levels define the system functions a particular user can
perform. Depending on the authority assigned to you, there are
certain system functions you may be prohibited from performing. The
following information describes the authority levels available in the
TouchCenter and provides the equivalent authority level name that
you will find if you are reading your alarm system manuals. The
authority levels available in the TouchCenter are as follows:
S E C T I O N
User Codes
o
How to Access User Setup
5
5–1