Configuring Event Settings - Honeywell Performance Series User Manual

8 Configuring Event Settings

This chapter contains the following sections:
•
Configuring Motion Detection Settings
•
Configuring Video Loss Settings
•
Configuring Video Tampering Settings
•
Configuring Scene Change Settings
•
Configuring System Abnormality Event Settings
•
Configuring Alarm Input Settings
•
Configuring Heat Map
•
Configuring Face Detection Settings
•
Configuring Audio Detection Settings
•
•
Configuring People
The people counting feature analyzes the video to count the number of people that pass
through or appear in the video.
1. Go to Main Menu  SETTING  EVENT  PEOPLE COUNTING.
Figure 8-20 People Counting Configuration Screen
2. Select the Channel to configure for people counting from the drop-down menu and check
the Enable check box.
3. Click RULE to set up an area for people counting. You can move or resize the area using
your mouse. To move the area, drag one of the sides. To resize the area, drag one of the
corner handles.
on page 79.
on page 83.
on page 84.
on page 85.
on page 89.
on page 94.
on page 95.
on page 96.
Counting
Configuring Event Settings
on page 86.
77