Honeywell Performance Series User Manual page 168

Performance Series Network Video Recorder User Guide
Figure 12-19 Local Play - Select a File Interface
2. Select a file, then click Open. A media player opens and plays the selected video.
Section 3: PTZ Control Panel, Image and Alarm Configuration Panels
PTZ Control Panel
See Controlling PTZ Cameras
Image and Alarm Configuration Panels
See Configuring Camera Image Conditions Settings
Image settings.
See Alarms on page
Section 4: Viewer Configuration Controls
Table 12-2 Viewer Configuration Controls
Button
154
on page 30 for more about controlling PTZ cameras.
235 for more information about Alarms.
Name
Video Quality
Aspect Ratio
Fluency
Full Screen
on page 163 for more information about
Description
Click to select the video quality. Select
either High quality or Low quality.
Click to switch between the camera's
native aspect ratio and the best aspect
ratio to fit in the current video panel.
Click to configure the fluency. Select
from Fluency Level 1, Fluency Level 2,
Fluency Level 3, Middle level, Latency
Level 1, Latency Level 2, and Latency
Level 3.
Click to switch the viewer to show video
full screen. Click Esc (on your PC) to
quit full screen.