Honeywell Performance Series User Manual page 201

Figure 12-57 SNMP Configuration Interface
Table 12-18 SNMP Configurations
Configuration Description
Enable Select this check box to enable the SNMP function.
If you check V1, then the system processes only the V1 information.
SNMP Version If you check V2, then the system processes only the V2 information.
If you check V3, then the system processes only the V3 information.
The listening port of the proxy program of the NVR. It is a UDP port, not
SNMP Port
a TCP port. This value ranges from 1 to 65535. The default is 161.
This is a string, and it is a command between the managing processes
and the proxy process. Read Community defines the authentication,
the access control, and the management relationship between one
proxy and one managers' group.
Read Community
Ensure that the device and the proxy are the same. The Read
Community reads all the objects the SNMP supports in the specified
name. The default is Public.
This is a string, and it is a command between the managing processes
and the proxy process. It defines the authentication, the access control,
and the management relationship between one proxy and one
Write Community
manager's group. Ensure that the device and the proxy are the same.
The Write Community reads, writes, and/or accesses all of the objects
the SNMP supports in the specified name. The default is Write.
The Trap information destination address from the device's proxy
Trap Address
program.
The Trap information destination port from the device's proxy program.
Trap Port
The Trap port allows the gateway device and the client-end PC in the
LAN to exchange information.
Web Client Operation
187