Performance Series Network Video Recorder User Guide
HEN04103L/HEN08103L
Table 1-1 NVR Front Panel Components
Component
Name
Power Button
IR Receiver
Shift
Assistant
Play Previous
Play Next
Slow Play
Fast Play
Reverse/Pause
4
Icon
Function
Power button. Press this button for three
seconds to boot up or shut down the NVR.
Receives the signal from the remote control.
(⇑ ) SHIFT
•
•
Fn
•
•
•
•
•
•
I
In playback mode, play the previous video.
I
In playback mode, play the next video.
Click to adjust the playback speed. Various
slow playback speeds are available.
Click to adjust the playback speed. Various fast
playback speeds are available.
II
•
•
When the cursor is in a textbox, click this
button to switch between numbers and
letters (lower case/upper case).
Enable/disable a tour.
Single window monitor mode: Click this
button to display the Assistant function; to
start PTZ control (not supported); and to
configure the image color.
Backspace function: When entering letters
or numbers, press and hold for 1.5 seconds
to delete the last-entered character.
Motion detection: Use in conjunction with
the direction keys.
Text mode: When entering characters, click
to switch between numbers and letters
(uppercase/lowercase).
HDD management: Click to switch the
HDD recording information and other
information. (Menu prompt.)
Other special functions.
Normal playback: Click to reverse playback.
Reverse playback: Click to pause playback.