Honeywell Performance Series User Manual page 217

Network Alarm are the alarm signals from the TCP/IP. You cannot select the sensor type or
anti-dither functions.
1. Click Net Alarm in the ALARM configuration interface.
2. The configuration of Net Alarm options is very similar to the configuration for Local
Alarms. Please see
time periods and event actions.
3. Click OK to save the settings.
Figure 12-72 WEB - Net Alarm Configuration Interface
Configuring IPC External Alarms
IPC External Alarms are the alarm signals from a connected IP camera.
1. Click IPC External Alarm in the ALARM configuration interface.
2. The configuration of IPC External Alarm options is very similar to the configuration for
Local Alarms. Please see
setting time periods and event actions.
3. Click OK to save the settings.
Configuring Local Alarms
Configuring Local Alarms
on page 200 for more information on setting
on page 200 for more information on
Web Client Operation
203