Honeywell Performance Series User Manual page 212

Performance Series Network Video Recorder User Guide
Figure 12-69 Smart Plan Configuration Interface
Configuring People Counting
The people counting feature analyzes the video to count the number of people that pass
through or appear in the video.
1. Go to Setup  Event People Counting.
Figure 8-20 People Counting Configuration Screen
2. Select a Channel to configure for people counting from the drop-down menu and check
the check box.
3. Click Draw Rule to set up an area for people counting. You can move or resize the area
using your mouse. To move the area, drag one of the sides. To resize the area, drag one of
the corner handles.
4. Click Draw Target to set up the target size. You can move or resize the area using your
mouse. To move the area, drag one of the sides. To resize the area, drag one of the corner
handles.
To enable OSD which displays the Enter and Leave numbers, check OSD Overlay. To clear
5.
the overlay, click Clear.
6. In the Name field, enter the name of rule.
198