Honeywell Performance Series User Manual page 19

Play/Pause
ESC
Record
Up/Down
Left/Right
Enter
USB 2.0 Port
HDD Abnormal
Indication Light
Network Abnormal
Indication Light
Figure 1-2 NVR Back Panel HEN081*4 NVR
HEN161*4 / HEN321*4 NVR
HEN162*4 / HEN322*4 / HEN642*4 / HEN163*4 / HEN323*4 / HEN643*4 NVR
II
•

•
•
•
Search interface.
ESC
•
•
Rec
Click to start/stop manual recording.
 
•
•
•
  •
•
ENTER
•
•
•
Connect to a USB 2.0 storage device, USB 2.0
mouse or CD/DVD burner.
HDD
Lights BLUE to indicate an HDD error or when
the HDD capacity is below the specified
threshold.
Net
Lights BLUE to indicate that a network error
has occurred or that there is no network
connection.
Reverse playback or pause mode: Click to
return to normal playback mode.
Normal playback: Click to pause playback.
Pause mode: Click to resume playback.
Real-time monitor mode: Click to enter the
Go to the previous menu or cancel the
current operation.
Playback: Click to go back to the real-time
monitor mode.
Activate the current control, modify setup,
and then move up and/or down.
Increase or decrease the current number.
Assistant function such as the PTZ menu
(not supported).
Shift the currently active control, then move
left or right.
Playback mode: Click to control the
playback bar.
Confirm the current operation.
Go to the Default button.
Go to the Menu.
Introduction
5