Honeywell Performance Series User Manual page 225

2. Click Setup. The Setup configuration interface opens.
Figure 12-83 Set Configuration Interface
3. Configure the schedule, then click OK.
Table 12-24 Schedule Configurations
Configuration
Regular
MD
Alarm
MD&Alarm
Analytics
POS
4. Click OK to save the settings, and then click OK to save the Schedule configuration.
Configuring HDD Manager
Click HDD Manager under STORAGE to open the HDD Manager configuration interface.
Select channels to which to copy the current configurations, then click
OK.
Description
Check to enable the Regular schedule mode for the period.
Check to enable the Motion Detection schedule mode for the period.
Check to enable the Alarm mode for the period.
Check to enable the MD&Alarm mode for the period.
Check to enable the Analytics mode for the period.
Check to enable the POS mode for the period.
Web Client Operation
211