Configuring Local Storage For Schedules; Configuring The Hdd Group Settings; Figure 5-51 Local Storage Configuration Interface For Schedules; Figure 5-52 Hdd Setting Configuration Interface - Honeywell HEN04111 User Manual

192 | Embedded Network Video Recorder User Guide
3.
4.

Configuring Local Storage for Schedules

Click Local Storage in the Schedule configuration interface to open the Local Storage
configuration interface.
You can see the HDD information, and you can select the read-only / write-only redundancy (if
there is more than one HDD), and formatting.

Configuring the HDD Group Settings

Click HDD Setting in the Schedule configuration interface to open the HDD Setting
configuration interface.
Select the HDD group in which you want to save the recording.
www.honeywell.com/security
Configure the schedule, then click Save.
Table 5-22 Schedule Configurations
Configuration
Channel
Regular
Motion
Alarm
MD&Alarm
Click Save to save the settings, and then click Save to save the Schedule configuration.
Figure 5-51 Local Storage Configuration Interface for Schedules
Figure 5-52 HDD Setting Configuration Interface
Description
Select a channel from the drop-down list.
Check to enable the Regular schedule mode.
Check to enable the Motion Detection schedule mode.
Check to enable the Alarm mode.
Check to enable the MD&Alarm mode.