Configuring Audio Detection Settings - Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide
Record Channel: Select the channel(s) that you want to record when the alarm is
triggered. In the Delay box, specify the amount of time (10–300 s) to delay recording after
a face detection event is triggered.
Note
PTZ Activation: Select the check box to activate PTZ functions, and then click Set. In the
PTZ Activation window, for each PTZ camera, select the preset, tour, or pattern that you
want to be called when the face detection event occurs, and then click OK.
Tour: Select the check box to enable a tour of the selected channels.
Snapshot Select the check box to take a snapshot of selected channels.
Log: Select the check box to enable logging of the face detection event.
Voice Prompts: Select the check box to enable the playing of a voice prompt audio file
when a face detection event is triggered. Use the File Name drop-down arrow to select the
audio file to play for the events.
Buzzer: Select the check box to activate a buzzer noise at the NVR.
7. Click Apply to save your settings. To return to the main menu, click OK.

Configuring Audio Detection Settings

The audio detection feature detects audio changes in the camera scene that can generate
events and corresponding actions.
1. Go to Main Menu  SETTING  EVENT  Audio Detection.
Figure 8-22 Audio Detection Configuration Screen
2. Select the Channel to configure for audio detection from the drop-down menu and check
one or both of the Input Abnormal and Intensity Change check boxes.
96
You also need to set the alarm recording period. Go to Storage
 Schedule to configure the current channel for scheduled
Configuring the Video Recording
alarm recording. See
Schedule
on page 38.