Configuring Storage Settings; Configuring The Basic Settings - Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide

9 Configuring Storage Settings

This chapter contains the following sections:
•

Configuring the Basic Settings

•
Configuring the Recording Schedule
•
Configuring HDD Manager Settings
•
Configuring FTP Settings
•
Configuring HDD Advanced Settings
•
Configuring NAS Storage
•
Configuring NAS Manager
•
Configuring Record Settings
•
Configuring HDD Detect Settings
Configuring the Basic Settings
Go to Main Menu  SETTING  STORAGE  BASIC.
Figure 9-1 Storage Basic Configuration Tab
HDD Full: Set to Overwrite to continue recording over old data when the HDD is full. Set to
Stop Record to stop recording when the HDD is full. The default setting is Overwrite.
Pack Duration: Set the recording duration. Specify a time between 1 and 120 minutes. The
default setting is 60 min.
104
on page 104.
on page 105.
on page 107.
on page 108.
on page 110.
on page 111.
on page 112.
on page 112.
on page 113.