Honeywell Performance Series User Manual page 180

Performance Series Network Video Recorder User Guide
Day/Night
Configuring Encoding Settings
Click ENCODE under Image to open the Encode interface. After making any Encoding
changes, click OK to save the changes.
Figure 12-31 Encode Configuration Interface
If the NVR fails to retrieve the configuration information for your selected
Note
camera/channel, then you should navigate to a different window (such as
Snapshot or Overlay), then navigate back to the Encode window to refresh it.
Table 12-9 Encoding Configurations
Setting
Channel
Code Stream
Type
166
Street Lamp: The white balance threshold is set to street lamp mode.
Manual: You can manually set the gain for the red/blue channel. The
value ranges from 0 to 100.
Sets the camera color and the B/W mode switch. Day&Night Modes:
Colorful: The camera outputs video in color.
Auto: The camera switches from Color to Black & White according to
the conditions, such as if the scene is generally bright, or if IR
illumination is required.
B/W: The camera outputs black and white video.
Description
Select a channel from the drop-down list.
Select from Regular, MD, and Alarm. You can select different encoding
frame rates for different recorded events.