Honeywell Performance Series User Manual page 228

Performance Series Network Video Recorder User Guide
Table 12-26 Recording Storage Interface
Setting
Channel
Auto
Manual
Stop
Start All/Stop All
Configuring Advanced Storage Settings
1. Click Advanced under Storage to open the Advanced storage interface.
Figure 12-87 Advanced Storage HDD Interface
2. On the Advanced HDD tab, you can assign names to hard drives and hard drive groups.
3. On the Main Stream, Sub Stream, and Snapshot tabs you can select the hard drive or
hard drive groups to store recorded data from each stream channel or snapshot channel.
Figure 12-88 Advanced Main Stream Interface
4. Click OK to save your settings.
214
Description
See the channel numbers, including the maximum number of
channels.
Select Auto, and the system enables the automatic recording function
as you set it in the Recording Schedule Setup. See Configuring Storage
Schedules on page 73.
This is the highest priority. Enable the corresponding channel to record
not matter what period was applied in the Recording Setup.
Stop recording the current channel no matter what recording setup is
applied to that channel.
Select the All selections to make the same setting for all channels.