Honeywell Performance Series User Manual page 45

Expanded PTZ Control Panel
Figure 3-6 Expanded PTZ Control Panel
Table 3-4 Expanded PTZ Control Panel
# Name
1
Preset, Tour,
Pattern
2
No.
3
Aux
4
Enter Menu
5
AutoScan
6 AutoPan
7
Flip
8
Reset
9
Aux Config
To display the PTZ control panel
1. Right-click anywhere on the screen to display the shortcut menu.
2. Click PTZ. The PTZ control panel opens.
Figure 3-7 PTZ Control Panel
3. To expand the PTZ control panel, click the arrow at the right side of the panel.
1 2
Function
Configure/call PTZ functions.
Enter number of PTZ function to call.
Call auxiliary functions.
Enable up-the-coax OSD menu configuration for non-
PTZ camera.
Cause camera to continually pan between two points
that you have defined.
Cause camera to continually rotate 360 degrees.
Cause camera image to flip 180 degrees.
Restore default settings.
Configure auxiliary functions.
Viewing Live Video
31