Honeywell Performance Series User Manual page 230

Performance Series Network Video Recorder User Guide
Figure 12-90 Date & Time Configuration Interface
Table 12-28 Date & Time Configurations
Configuration
Date Format
Time Format
Date Separator
System Time
Sync PC
Time Zone
DST
NTP
NTP Server
Port
Upgrade Interval
Holiday Settings
1. Click the Holiday tab in the GENERAL settings configuration interface to open the
Holiday Setup configuration interface.
216
Description
Select the date format from the drop-down list.
Select from either 24 hour or 12 hour.
Select from a period (.), a hyphen (-), or a slash (/).
Set the NVR's time. You have to Save to activate this setting.
Click to synchronize your NVR's time with your PC's time.
Select a Time Zone for the NVR.
Click to enable Daylight Saving Time (DST). Click to select a type, either
Date or Week. Then configure a date and time when DST begins and
ends.
Click to enable the NTP server.
Enter the NTP time server address.
Enter the NTP time server port.
Configure the synchronization period between the NVR and the NTP
time server.