Honeywell Performance Series User Manual page 94

Performance Series Network Video Recorder User Guide
Figure 8-1 Motion Detection Settings Tab
2. On the Motion Detection tab, in the Channel box, select the channel (camera) to
configure for motion detection.
3. Select the Enable check box to enable motion detection for the selected channel.
4. Next to Region, click Set to define the motion detection region. A grid appears over the
live view screen and the motion detection region dialog box appears.
Figure 8-2 Motion Detection - Region Configuration Window
5. Set the Sensitivity level (0–100) and Threshold level (0–100) for the region(s) you want to
configure. Select from region 1-4 with the icons at the top of the dialog.
Sensitivity refers to the amount of change (as a percentage) in the image pixels between
frames. Moving the Sensitivity slider to the left decreases the sensitivity of the motion
detection and therefore more movement is required to trigger a motion detection event.
Threshold is the amount of motion required to trigger an event notification.
Note
80
The best way to configure motion detection is to experiment
with the sensitivity and threshold settings while someone is
walking in front of the camera.
Select the region to configure