Honeywell Performance Series User Manual page 6

List of Symbols
The following is a list of symbols that might appear on the NVR.
Symbol
iv
Explanation
The WEEE symbol.
This symbol indicates that when the end-user wishes to discard this
product, it must be sent to separate collection facilities for recovery
and recycling. By separating this product from other household-
type waste, the volume of waste sent to incinerators or landfills will
be reduced, and thus natural resources will be conserved.
The UL compliance logo.
This logo indicates that the product has been tested and is listed by
the Underwriters Laboratories.
The FCC compliance logo.
This logo indicates that the product conforms to Federal
Communication's Commission compliance standards.
The direct current symbol.
This symbol indicates that the power input/output for the product is
direct current.
The alternating current symbol.
This symbol indicates that the power input/output for the product is
alternating current.
The LDPE symbol.
This symbol indicates that this product is made of Low-Density
Polyethylene (LDPE).
The Direct Current symbol.
This symbol indicates that the product operates from a 12 V direct
current.
The Lead-free symbol.
This symbol indicates that the product does not contain lead (Pb).
The CCC compliance logo.
This logo indicates that the product conforms with the China
Compulsory Certification guidelines.
The Environment Friendly Use-period symbol.
This symbol indicates the length of time that this electronic product
can used without harming the environment.
The RCM Compliance symbol.
This symbol indicates that the product conforms with the Australian
RCM guidelines.