Rfm-5565 Register Sets; Reflective Memory Ram - GE PCIE-5565PIORC* Hardware Reference Manual

Ultrahigh speed fiber-optic reflective memory with interrupts
Table of Contents

Advertisement

2.3 RFM-5565 Register Sets

2.4 Reflective Memory RAM

24 PCIE-5565PIORC Reflective Memory Board
To go beyond the simple target read and write operation of the board, the user 
must understand and manipulate bits within three register sets. The three register 
sets are referred to as:
•  PCI Configuration Registers
•  Local Configuration Registers
•  RFM Control and Status Registers
PCI Configuration Registers – This set of registers is predefined by the PCI Local 
Bus Specification and is standard for all PCI and PCI Express devices. This 
register set contains the Vendor ID, Device ID, Subsystem Vendor ID and Base 
Address registers. The PCI Configuration Registers are first initialized and then 
modified as needed by the PCI bus system BIOS. The register set is rarely altered 
by the user, but the ability to read these registers, particularly the Base Address 
Registers, will be necessary to locate the other two sets of registers.
Local Configuration Registers – Base Address Register 0 has the starting address 
for register memory space accesses and Base Address Register 1 has the starting 
address for register IO space accesses. Some Local Configuration Registers 
pertinent to the RFM‐5565's operation include the Interrupt Control and Status 
Register (INTCSR) and the DMA Control Registers. 
RFM Control and Status Registers – The RFM Control and Status Registers 
implement the functions unique to the RFM‐5565 Reflective Memory board. These 
functions include RFM operation status, detailed control of the RFM sources for 
the PCI interrupt, and network interrupt access. These registers are accessed at 
locations offset from the address contained in Base Address Register 2.
This board is available with 128 or 256 MByte of onboard Reflective Memory 
SDRAM. The SDRAM starts at the location specified in Base Address Register 3. 
Unlike the previous versions of Reflective Memory products, the RFM Control 
and Status Registers do NOT replace the first $40 locations of RAM. The offset 
address range is $0 to $7FFFFFF for the 128 MByte and $0 to $FFFFFFF for the 
256 MByte option. 

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pci-5565piorc*

Table of Contents